Our Products

Rotary Evaporator

Laboratory equipment

Jacketed Reactor

Contact Us

We Cherish All Interactions

Plastic Pyrolysis Plant Design | Plastic Pyrolysis Reactor

Plastic Pyrolysis Plant Design | Plastic Pyrolysis Reactor

Pyrolysis Reactor: It is the main part of the pyrolysis system, solid wastes like waste plastic, tire, rubber, medical waste and oil sludge can be processed. And oil gas will be generated when the temperature inside reactor reaches 100°C, 250-280 °C is the temperature .

The quest for CO2-free hydrogen methane pyrolysis at

The quest for CO2-free hydrogen methane pyrolysis at

Test of reactor design and carbon outlet Second R&D project* R&D project Lab-scale proof of concept and sample production Proof of concept for reactor design and carbon outlet Duration ~3 years Second R&D project with * Government funding will be necessary due to high technological and commercial risk 2019 2025 December 10, 2019 I Dr. William Daloz

High Temperature Flash Pyrolysis of Wood in a Lab-Scale .

High Temperature Flash Pyrolysis of Wood in a Lab-Scale .

Zeng, Kuo, Gauthier, Daniel, and Flamant, Gilles. "High Temperature Flash Pyrolysis of Wood in a Lab-Scale Solar Reactor." Proceedings of the ASME 2014 8th International Conference on Energy Sustainability collocated with the ASME 2014 12th International Conference on Fuel Cell Science, Engineering and Technology.

Degradation of zirconate materials in ultra-high .

Degradation of zirconate materials in ultra-high .

A reverse-flow reactor enables the pyrolysis of hydrocarbons at temperatures up to 2000 °C to high value petrochemical products. Materials in the reactor hot zone, exposed to such extreme temperatures, are also subject to rapid oxidative cycling over a period of several seconds between a regeneration (heat addition) step that is mildly oxidizing and a pyrolysis (cracking) step that is .

Pyrolysis characteristics of waste tire particles in fixed .

Pyrolysis characteristics of waste tire particles in fixed .

The lower CO 2 yield for reactor A means actually the occurrence of reforming reactions for high-C species by CO 2 in the high-temperature wall zone of reactor A. Corresponding to these features in composition, the HHV of pyrolysis gas is higher for reactor A because of its higher content of C m Hn and lower fraction of CO 2, as is shown in Fig .

Potential of pyrolysis processes in the waste management .

Potential of pyrolysis processes in the waste management .

Air and nitrogen were compared as the flow medium, and the pyrolysis temperature was higher in the case of the nitrogen atmosphere. At the same time, Biswal et al. studied the pyrolysis of paper cup waste in a semi batch reactor at a temperature range from 325 °C to 425 °C. The reaction time was reduced with increase in temperature (from 24 .

HIGH-TEMPERATURE HOMOGENEOUS PYROLYSIS OF .

HIGH-TEMPERATURE HOMOGENEOUS PYROLYSIS OF .

HIGH-TEMPERATURE HOMOGENEOUS PYROLYSIS OF ETHANE IN THE ADIABATIC COMPRESSION REACTOR I.V. Bilera A.V. Topchiev Institute of Petrochemical Synthesis, Russian Academy of Sciences, 29 Leninsky Prosp., Moscow 119991, Russian Federation Abstract: Thermal decomposition of ethane has been studied in a rapid compression machine over a range of

DESIGN OF A HIGH PRESSURE FLOW REACTOR FOR GAS .

DESIGN OF A HIGH PRESSURE FLOW REACTOR FOR GAS .

A High Pressure Flow Reactor (HPFR) was obtained, redesigned, and validated in order to understand and fully characterize chemical kinetics with respect to gas phase chemistry, specifically to increase the operating parameters in order to study fuels in engine like conditions (high temperatures, pressures, and fast residence times).

US20200002165A1 - High throughput methane pyrolysis .

US20200002165A1 - High throughput methane pyrolysis .

A system for hydrocarbon decomposition comprising a reactor volume, a mechanism to distribute the liquid catalyst as a liquid mist, a distributor to distribute a hydrocarbon reactant, a heat source, a separator to separate the solid product from the liquid catalyst, a re-circulation path and mechanism to re-circulate the liquid catalyst, and an outlet for at least one gaseous product.

Pyrolysis of Municipal Wastes | BioEnergy Consult

Pyrolysis of Municipal Wastes | BioEnergy Consult

Aug 02, 2019 · Pyrolysis is rapidly developing biomass thermal conversion technology and has been garnering much attention worldwide due to its high efficiency and good eco-friendly performance characteristics. Pyrolysis technology provides an opportunity for the conversion of municipal solid wastes, agricultural residues, scrap tires, non-recyclable plastics etc into clean energy.

Hazards associated with process of pyrolysis | Thermal .

Hazards associated with process of pyrolysis | Thermal .

Pyrolysis, thermal decomposition, is the used tyres treatment technology based on thermal destruction of feedstock under the high temperatures and lack of oxygen. All articles. News. 14.01.2020. Pyrolysis reactor TDP-2-2000 was sent for Slavneft-Krasnoyarskneftegaz. At the end of December, IPEC shipped a new reactor to complete. 21.10.2019.

The decomposition of methyltrichlorosilane: Studies in a .

The decomposition of methyltrichlorosilane: Studies in a .

Experimental measurements of the decomposition of methyltrichlorosilane (MTS), a common silicon carbide precursor, in a high-temperature flow reactor are presented. The results indicate that methane and hydrogen chloride are major products of the decomposition. No chlorinated silane products were observed. Hydrogen carrier gas was found to increase the rate of MTS decomposition.

Waste Tyre Pyrolysis Plant | Fast Delivery and Installation

Waste Tyre Pyrolysis Plant | Fast Delivery and Installation

Waste tyre pyrolysis plant adopts innovative technology to solve the problem how to recycle tyre. Pyrolysis of tyres is a thermochemical process to turn waste tyre into oil devoid of oxygen. Under the high temperature, oil (condensable), combustible gas (non-condensable), steel wire and carbon black will be generated. At the present time, the fast shipment, installation and training service .

Effect of the torrefaction temperature on the structural .

Effect of the torrefaction temperature on the structural .

The reactor was purged with high-purity nitrogen for 5 min before the beginning of the experiment. Afterward, heat was applied rapidly to setting temperatures at a heating rate of 250 °C/min, which was held for 30 min. The quantity of nitrogen flow was 150 mL/min, and the pyrolysis temperature was 450 °C.

Solar Assisted Fast Pyrolysis: A Novel Approach of .

Solar Assisted Fast Pyrolysis: A Novel Approach of .

To investigate these parameters, the reactor temperature was firstly raised to 162°C using solar concentrator and then to 400–600°C by external biomass heating. 4.3.1. Energy Input for Heating. Generally, in fast pyrolysis, the reactor is heated up by external (biomass) or .

China Laboratory Pyrolysis Reactor with Programmable .

China Laboratory Pyrolysis Reactor with Programmable .

laboratory pyrolysis reactor with programmable digital temperature controller Introduction: high pressure reactor high pressure reactor for supercritical water gas chemical reaction made of Ni-Base Super-alloy, which has excellent creep strength and anti-oxidation. It can reach 1100 °C with a pressure up to 4Mpa under oxygen or inert gased.

Waste Tyre Pyrolysis Plant | Fast Delivery and Installation

Waste Tyre Pyrolysis Plant | Fast Delivery and Installation

◆ Pyrolysis: Push tyre into reactor and heat the chamber. When temperature is up to 180℃, we can get oil gas. When temperature reaches to 280℃, oil production process basically finishes.

US4341749A - Heating method for silane pyrolysis reactor .

US4341749A - Heating method for silane pyrolysis reactor .

An improved method for the pyrolysis of silane in a free-space reactor. The improved method involves non-uniform heat input along the axial length of a free-space silane pyrolysis reactor so that the axial temperature profile along the length of the surrounding reactor wall is essentially constant.

Rules of Thumb for Reactor Design and Process Conditions .

Rules of Thumb for Reactor Design and Process Conditions .

8. Oxygen concentration mainly affects the reactor temperature (a change of inlet oxygen concentration from 1 vol% to 3 vol% increases the peak temperature from 420°C to 550°C at the bottom of the reactor, and from 390°C to 420°C at the top of the reactor), which results in a decrease in arsenic retention with increasing oxygen .

Rules of Thumb for Reactor Design and Process Conditions .

Rules of Thumb for Reactor Design and Process Conditions .

The parameters controlled during pyrolysis (and their corresponding range) are: temperature (330°C - 430°C), heating rate (5°C/min – 20°C/min), residence time (10 min – 40 min), reactor pressure (0 bar gage – 5 bar gage), heater gas flow rate (1000 Nl/h – 1800 Nl/h), oxygen concentration (1 vol% - 3 vol%) and steam concentration (5 wt% - 15 wt%).

DESIGN OF A HIGH PRESSURE FLOW REACTOR FOR GAS .

DESIGN OF A HIGH PRESSURE FLOW REACTOR FOR GAS .

A High Pressure Flow Reactor (HPFR) was obtained, redesigned, and validated in order to understand and fully characterize chemical kinetics with respect to gas phase chemistry, specifically to increase the operating parameters in order to study fuels in engine like conditions (high temperatures, pressures, and fast residence times).

Pyrolysis reactor TDP-2-2000 was sent | Thermal .

Pyrolysis reactor TDP-2-2000 was sent | Thermal .

At the end of December, IPEC shipped a new reactor to complete the continuous pyrolysis plant TDP-2-2000, which processes drilling waste at the Kuyumbinskoye field of 'Slavneft-Krasnoyarskneftegaz'. Equipping the complex with an additional pyrolysis unit will by far increase productivity. In addition, the tandem concept is an effective solution for the treatment of watered oil sludge .

Continuous Thermal Decomposition Plant

Continuous Thermal Decomposition Plant

2. The pyrolysis reactor is heated by the fuel burner. When the heat temperature rises to the set value, the decomposition process starts. 3. After the operation process is stable, heating is carried out by gas burner operating on pyrolysis gas. 4. From the pyrolysis reactor, the oil gas goes into condensers. Then it is cooled in the heat .

N-Decane pyrolysis at high-temperature in a flow reactor .

N-Decane pyrolysis at high-temperature in a flow reactor .

The thermal decomposition of hydro-carbons. Part 1. n-alkanes (C≥5). Research on Chemical Intermediates 1996, 22 (3), 275-314. DOI: 10.1163/156856796X00458. F. Billaud. Thermal decomposition of propane: An original method of temperature calibration in a plug flow pyrolysis .

Plastic to Diesel Process - Plastic/Tyre Pyrolysis Plant .

Plastic to Diesel Process - Plastic/Tyre Pyrolysis Plant .

The pyrolysis equipment will heat the reactor with high temperature, and when it reaches the related temperature, the waste plastic will generate oil gas in the reactor; then the oil gas will become the liquid oil after passing through the subsequent connected cooling system. The oil can be used as fuel directly.

Thermolysis of High-Density Polyethylene to Petroleum Products

Thermolysis of High-Density Polyethylene to Petroleum Products

From the study of HDPE pyrolysis in a fluidized sand bed reactor, they have found that the yield of total gas obtained increases in the range 500°C–800°C from 5.7 to 94.5%; at higher temperatures, the yield of total gas decreases slightly; the formation of methane, benzene, and toluene is favored by high residence times, but ethane .

Fast pyrolysis of birch wood in a bubbling fluidized bed .

Fast pyrolysis of birch wood in a bubbling fluidized bed .

Fast pyrolysis is a common thermal decomposition technology that rapidly converts biomass into crude bio-oil with byproducts, bio-char, and gas at a moderate temperature and in the absence of oxygen.

Coal pyrolysis at high temperature (Conference) | OSTI.GOV

Coal pyrolysis at high temperature (Conference) | OSTI.GOV

@article{osti_6255342, title = {Coal pyrolysis at high temperature}, author = {Solomon, P R and Hamblen, D G and Goetz, G J and Naskala, N Y}, abstractNote = {A recently developed pyrolysis model to simulate coal pyrolysis in a heated grid has been applied to the high temperature rapid pyrolysis of coal in an entrained flow reactor. The model relates evolved products to the coal structure.

Nitromethane pyrolysis and oxidation in a jet-stirred .

Nitromethane pyrolysis and oxidation in a jet-stirred .

vessel over temperature range of 700–740K using GPC techniques as-sociated with an original sampling procedure and spectroscopic mea-surements. Recently, Weng et al. [31] studied the oxidation of ni-tromethane in a jet-stirred reactor over the temperature range of 600–875K at atmospheric pressure and fuel–air equivalence ratios of 0.4 and .

Pyrolysis Technical Analysis

Pyrolysis Technical Analysis

Pyrolysis is the thermal decomposition of organic compounds in the absence of air/oxygen, starting at temperatures between 350-550 o C up to 700-800 o C. The long hydrocarbon chains in .